What’s the difference between a cheap gun and an inexpensive gun?
An inexpensive gun has a low price but still runs. A cheap gun cut corners on reliability, materials or support.
An inexpensive gun has a low price but still runs. A cheap gun cut corners on reliability, materials or support.
Take a basic class and rent a few guns at a range before you buy anything.
Ask what the gun is for, what your state allows, how to store it safely, and where to get good training. Those four answers guide everything else.
Probably not. A gun that fires while you lower the hammer usually means the hammer slipped from your thumb while the trigger was pulled. Stop using it until a gunsmith checks it.
On a Mauser Model 95 (7×57), yes, a gunsmith can do it, because the .308 uses the same size bolt face. On a Steyr M95 straight-pull, it’s not practical.
Don’t use test-firing to find out. If the brake loosens or shifts, shot or the wad can hit it. Take it off, clean it, and install it properly.
They’re very different materials. Wood is rigid and breaks apart. Tissue is soft, elastic and mostly water, so bullets expand, tumble and slow down in it in ways a board can’t show you.
Not as a private person. You can’t legally do it without permits on both ends. Buy through a licensed Dutch dealer instead.
Only if it’s chambered for .38 Special or .357 Magnum. Read the barrel. “.38” covers several different cartridges.
No. Don’t do it.
Website Consulting and Building
Custom websites for businesses and projects that want results.
Built on twenty years of running a network of sites people actually use.